UTV Rotopax Mounts That Actually Fit – Billet Mounts for Round Bars & Profiled Cages
If you’re searching for UTV Rotopax mounts that actually fit your side-by-side, stay tight on the trail, and don’t require drilling, you’re in the right place. Most “universal” fuel can mounts were built for Jeeps and overland rigs — not UTVs. That’s why Dirtbag Brands engineered two billet aluminum Rotopax mounting systems, designed specifically for Polaris, Can-Am, Honda, Kawasaki, Yamaha, and CF Moto machines.
Why Most Rotopax Mounts Don’t Work on UTVs
Most aftermarket Rotopax kits claim “universal fit,” but here’s the problem:
- Poor clamp fitment on UTV roll cages
- Thin brackets that flex under vibration
- Drill-required bed mounts that rattle loose
At speed or on rough terrain, these mounts fail. We built ours from 6061 billet aluminum, powder-coated for durability, and locked them down with a 4-bolt clamp system that doesn’t budge.
The 2 Mounts That Fit 98% of UTVs
RDMRL-1 – Round Roll Bar Rotopax Mount
- RDMRL-1 – Round Roll Bar Rotopax Mount
- Fits all 1.5″ to 2″ roll cages → Polaris RZR, Can-Am Maverick X3, Honda Talon, Yamaha RMAX, Kawasaki KRX, and more
- 6061 billet aluminum + black powder coat
- 4-bolt clamp for vibration resistance
- Works with Rotopax locking handles & extension mounts
- Stainless hardware included (use blue threadlocker)
- No drilling required
This is a true bolt-and-go solution. No adapters. No extra brackets. Just clamp it, mount your can, and ride.
Click to learn more about RDMRL-1
PMBRM-1 – Profiled Cage Rotopax Mount
- Fits Polaris Ranger, General, Xpedition, Can-Am Defender, CF Moto UForce & ZForce (profiled cages)
- Same billet aluminum + powder coat build
- Designed for ADV and NorthStar trims (Polaris Xpedition)
- Direct clamp fit — no adapters needed
- Fully compatible with Rotopax locking & stacking accessories
Polaris Xpedition owners: this is your go-to. It fits ADV and NorthStar trims with no mods needed.
Click to Learn more about the PMBRM-1
UTV Fitment Chart: Round vs Profiled Cage
| Brand | Models | Mount SKU | Cage Style |
|---|---|---|---|
| Polaris | RZR, Pro XP, Turbo R, XP1000 | RDMRL-1 | Round Roll Bar |
| Polaris | Ranger, General, Xpedition | PMBRM-1 | Profiled Cage |
| Can-Am | Maverick X3, Maverick R, Commander | RDMRL-1 | Round Roll Bar |
| Can-Am | Defender (all trims) | PMBRM-1 | Profiled Cage |
| Honda | Talon, Pioneer | RDMRL-1 | Round Roll Bar |
| Kawasaki | KRX, KRX4, Teryx H2, Mule ( all makes & models) | RDMRL-1 | Round Roll Bar |
| Yamaha | Wolverine RMAX, YXZ | RDMRL-1 | Round Roll Bar |
| CF Moto | UForce, ZForce | PMBRM-1 | Profiled Cage |
Where to Mount Rotopax on Your UTV
- Mount on B-pillars or C-pillars, depending on your setup
- Avoid heat zones like the engine or exhaust areas
- Choose locations that preserve tailgate and cargo access
These mounts give you the freedom to install without cutting, drilling, or second-guessing your setup.
Yes. Both RDMRL-1 and PMBRM-1 work with all official Rotopax accessories.
No. These are complete out-of-the-box systems. Just add your can.
Absolutely. The PMBRM-1 is designed for both ADV and NorthStar trims.
Yes — the RDMRL-1 fits all RZR models with 1.5″ to 2″ round roll bars. This includes Pro R, Pro S, Pro XP, and every other model
That’s a perfect match for RDMRL-1. Clean fit. No extras required.
Expect a 5–10 minute job using standard tools. Don’t forget threadlocker. We recommend blue with stainless hardware and 6061 billet components.
What Sets These Mounts Apart
- 100% USA-designed and engineered
- No extra hardware — everything is in the box
- 4-bolt clamping system keeps it locked through chatter and whoops
- Supports Rotopax locking handles and dual can extensions
- Quick install — no drilling, no rattles, no worries
You bring the gas can. We bring the clamp that holds it down.
Best Rotopax Mount for Polaris RZR & Can-Am Maverick X3
If you own a Polaris RZR or Can-Am Maverick X3, the RDMRL-1 is exactly what you need. These machines run round roll bar cages between 1.75″ to 2″, and our billet 4-bolt clamping system is built to handle high-speed hits, vibration, and tight trail flex.
Whether you’re packing fuel for a long dune ride or gearing up for a mountain trail, this mount will hold up and stay quiet. No drilling. No flex. Just a clean fit.
Final Thoughts – Mount Like a Dirtbag
You didn’t buy a UTV to bungee fuel cans to the roll cage. You need a clamp that’s built for off-road abuse. That’s why Dirtbag Brands billet Rotopax mounts deliver factory-like fitment, zero rattle, and trail-tested reliability.
At Dirtbag Brands, our billet Rotopax mounts are made for abuse. Correct fit, correct finish, and build for wherever the trail takes you! Period.
Available now: [RDMRL-1] and [PMBRM-1] — bolt it, pack it, and go.
Since you are looking at the best UTV Rotopax mounts on the market, don’t forget to check out our mirror selection with pod light mounts for your ride as well. You can check out our fitment guide here.
Don’t forget to check out our versatile whip mounts for both round roll bar and profiled cage here.
Comments are closed